You may only publish this article on your website, in your ezine, or in your newsletter if you adhere to the rules

< - - START - - >

 

Dealing with a frozen pipe

 

In the winter months many people experience problems triggered by the cold weather. Knowing how to deal with a freeze before it bursts a pipe or fitting can save a lot of mess and upset. Of course, a lot of problems with cold weather can be eliminated by making sure all plumbing is suitably insulated.

This guide, however, should help you get out of difficulty should you be faced with a freeze.

Identify the location of the freeze. By checking the flow of water from all appliances, it should be possible to narrow down the position of the freeze. Once the section of pipe has been identified, you may be able to narrow down the exact point further by looking for clues. Draughts from air vents next to pipework, an unlagged section of pipe or pipework next to a vent in the roofspace are all possible causes.

Before attempting to thaw the blockage, inspect the pipe and any nearby fittings. It is possible for the pipe to have split, or the fittings to have been pushed apart by the expansion of the ice. In this case, melting the ice will result in a leaking joint. If you find such damage, the water supply to this section should be turned off first, and preparation made to contain the leaking water once the pipe is thawed.

Open the tap on the affected pipe to allow water to flow as soon as the ice begins to thaw.

If you are unsure as to the location of the ice blockage on the length of pipe, start nearest to the tap and gradually work away from it.

Apply heat gently to the affected area using a hair dryer or hot water bottle. A hair dryer, however, may only be used if you are certain that the pipe / joints are not damaged or split. Never use an electrical appliance in the vicinity of water. If you use a blowtorch, guard against fire and apply only gentle heat. Excessive heating will cause soldered joints to fail.

As with all DIY, make sure you give safety top priority - if in doubt, get professional help.

 

From the authors of the Diyfixit Home Improvement and Diy Guide
http://www.diyfixit.co.uk
Copyright © 2007 Dragon Web Ltd

 

< - - END - - >

The rules for publishing these articles are:

The article including the resource details at the bottom must remain complete and unedited.
You may not add, rearrange or remove any element or change the context of the article.
You may not use the article in unsolicited email. Distribution may only be through opt-in email.
You must send a copy of the ezine or newsletter containing the article and/or the URL of the page on the website where you have published the article, to articles@diyfixit.co.uk
URLs in the article and the resource details must be set as hyperlinks.

If you do not wish to adhere to these rules, please do not use these articles

Thank you

If you would like to discuss reproducing these articles in any other way, please contact us by email - articles@diyfixit.co.uk